Legrand Smart Intercom KIT CLASSE 300 EOS with Alexa

3,316.00 SAR

Visit our nearest branch to purchase the device on installments with your Home package.

You will get it on installments with Home Internet Packages for 115 SAR per month for 24 months.
(Other Installment options are available(

In stock

Techniqal Specification

  1. 5” vertical touch screen display
  2. “Favourites” touch key
  3. Microphone
  4. Touch key for answer:
  • Green LED flashing: incoming call
  • Green LED steady: communication in progress
  1. Entrance panel/scrolling activation touch key
  2. Door release key:
  • White LED steady: communication in progress
  • White LED flashing for 2 seconds: active “Safe Door Wock” function, deactivated key
  • White LED steady for 2 seconds and audible warning: door opening
  • White LED flashing (sequence of 2 short flashing): Door open* or Professional Studio active
  1. Bell exclusion notification LED Red LED flashing: bell excluded
  2. Notification LED:
  • yellow LED: notifications from Alexa
  • white LED: answer machine messages or firmware updates
  1. Wi-Fi signal notification LED:
  • Red LED flashing: WI-FI on but not connected to the network
  • LED off: WI-FI disabled or working correctly
  • Red LED steady: forwarding of call , automatic switching on or “Call home” function in progress from Home + Security App
  1. Proximity sensor

Alexa control keys

A1: Key used to increase the volume

A2: Key used to decrease the volume

A3: Alexa enabling key

A4: “Mute” key, to disable both Alexa and device microphone

  1. Speaker
  2. Clamps for connection to the BUS MH (MyHOME) (future application)
  3. Additional bell connection clamps (5M – 1). The connection must be point – point on the clamps of the additional bells.
  4. Clamps for the connection of an external call to the floor pushbutton
  5. Micro-switch to enable the additional power supply *
  6. Micro-switch for “Safe door lock” function *
  7. Micro-switch for “Master” function *
  8. Line termination micro-switch *
  9. LAN connector:

For connection using RJ45 cable, use accessory 344844 (not supplied)

  1. Clamps for connection to the AV BUS (audio video)
  2. Additional power supply clamps (2– 1)
  3. Service USB interface
  4. Configurator socket

*ON = enabled

OFF = disabled

To activate the function with device not powered

SKU: LGKIT300 Category: Tag:
Updating…
  • No products in the cart.